WiFiPerf – iPerf3 / iPerf 3 for iOS App (iPhone, iPod Touch, iPad)
Screen Shots Below
Client Settings – IP address, server port, and test duration can be configured. If localhost / 127.0.0.1 is configured as server address then app will test with itself (loopback test, requires server to be enabled). To start test the on/off button is toggled. When the client test completes the toggle resets to off.
Server Settings – Server enable/disable and port can be configured. The Server address is taken from the WiFi interface address. If the WiFi interface is disabled, no info will be shown for server address value.
Server Log – This screen shows results from bandwidth tests. The log screen must be refreshed by pulling screen down to show new results or toggling between server settings and log screen.